Author Topic: E300 Video over scaning  (Read 2463 times)

Ben

  • Newbie
  • *
  • Posts: 23
    • View Profile
E300 Video over scaning
« on: February 21, 2014, 12:58:00 am »
Hi Forum,

I have a customers E300 that the video keeps flickering.  It is able to get readings on occasion but it is only at 12 or so.  That was trying to get a reading on the calibration ball.  The video cable to the camera originally came un-soldered, after the repair it still flickers and will not take good readings.  Any help or suggestions would be greatly appreciative.

Thank you,
Ben

Ben

  • Newbie
  • *
  • Posts: 23
    • View Profile
Re: E300 Video over scaning
« Reply #1 on: February 26, 2014, 03:08:50 am »
I tried a new cable from a different E300 and it is doing the same thing.  Also noticed that the Green LED on the controller board flickers with the flickering of the camera image.

Michael.Berkovich

  • Newbie
  • *
  • Posts: 46
    • View Profile
Re: E300 Video over scaning
« Reply #2 on: February 28, 2014, 08:15:19 am »
Hi David,

From the images posted, I would suggest to ship unit back to Medmont.
the camera most likely needs to be replaced.

Can you please tell me the serial number of this unit, does it use Leutron card, or E300 Converter box?

Thanks,
Michael B.